EAMCET/ECET/ICET CODE: CBIT
For Admissions Contact : +91 7799344443, +91 9640808099

Chaitanya Bharathi Institute of Technology

Recognised by UGC Under the section 2(f) & 12(B) of UGC Act, 1956

Accredited by NAAC & NBA, Civil, EEE, ECE & CSE
Approved by AICTE, New Delhi, Affiliated to JNTUA, Anantapuramu,
Approved by S.B.T.E.T Andhra Pradesh

Vidya Nagar, Proddatur-516360, Kadapa (dist.) P.H. 08564-278000, Fax: 08564-278444

Department of Electrical and Electronics Engineering

The department of Electrical and Electronics Engineering was started in the year 2008. Known all along for its high quality of experienced faculty, The faculty maintains close relation with the students and pays individual attention. Students are given deep exposure in their field of study with a career orientation. The department, in keeping with the objectives of the institute, emphasizes discipline, encourages the involvement of the faculty in the development of the laboratories, and takes active interest in the student counseling.

Vision

  • To impart knowledge in ever-changing Electrical and Electronics Engineering to promote highly competent, innovative and ethical computer professionals through excellence in teaching, training and research.

Mission

  • To provide opportunities for students to work on the different kinds of hardware and software platforms prevalent in industry, with the objective of being responsive to industries’ needs, the programme goes beyond the curriculum prescribed by the University.

Programme Educational Objectives (PEO's)

PEO No. Programme Educational Objectives
PEO1 CBIT Graduates shall have strong foundation in Electrical and Electronics Engineering along with advance knowledge on contemporary technologies and devise solutions for realistic and social issues in the society.
PEO2 Graduates shall be employed in software and hardware industries or pursue higher studies or research or become entrepreneurs.
PEO3 Graduates shall overcome cultural differences through teamwork, good communication and high patterns of discipline.

Program Specific Outcomes (PSO's)

PSO No. Program Specific Outcomes
PSO1 Ability to analyze, design and implement electrical systems.
PSO2 Ability to apply project management techniques to electrical/electronic systems.
PSO3 Take up administrative responsibilities involving project and financial management.

Program Outcomes (PO's)

PO No. Program Outcomes
PO1 Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
PO2 Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principlesof mathematics, natural sciences, and engineering sciences.
PO3 Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
PO4 Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
PO5 Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.
PO6 The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
PO7 Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
PO8 Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
PO9 Individual and team work: Function effectively as an individual, and as a member or leader in diverseteams, and in multidisciplinary settings.
PO10 Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
PO11 Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
PO12 Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest on text of technological change.

Faculty Details

With pride and commitment to excel deep within the institution by building values through flawless execution. Well Qualified, experienced and dedicated senior faculty members and technical supporting staff are here to mould the students to strive and excel in all spheres of life. Not only they motivate the students to participate in Seminars / Conferences / Workshops, but also encourage them in Research and Development Programmes. Our non-teaching staff members serve the needs of the students.

S.No Name of the faculty Qualification Designation
1 Dr.R.SARAVANAN Ph.D. Professor & HOD
2 Dr.C. RAJSELVAN Ph.D. Professor
3 Dr.J.POORNACHANDRAN Ph.D. Professor
4 Dr.R. SHANKAR Ph.D. Professor
5 Dr.K. NARESH VARMA Ph.D. Assoc. Professor
6 Dr.Y. PRAKASH Ph.D. Assoc. Professor
7 Mr. N. VARA PRASAD M.Tech.,(Ph.D.) Assoc. Professor
8 Mr. Y.PRAVEEN KUMAR REDDY M.Tech. Assoc. Professor
9 Mr.K.R. SIVA PRASAD M.Tech. Asst. Professor
10 Mr.P.NAGARJUNA M.Tech. Asst. Professor
11 Mr.P. RAVI KUMAR REDDY M.Tech. Asst. Professor
12 Mr. G. CHOUSAIN BASHA M.Tech. Asst. Professor
13 Mr. B. BHARGAVA REDDY M.Tech. Asst. Professor
14 MR. G. NAGARJUNA M.Tech. Asst. Professor
15 Mrs.B.LAKSHMI DEVI M.Tech. Asst. Professor
16 Mrs. SOORIYA PRABHA M.Tech. Asst. Professor
17 Mrs.MALLIKA M.Tech. Asst. Professor
18 Mr.D VISHNU VARDHAN REDDY M.Tech. Asst. Professor
19 Miss. P SUBHASHINI M.Tech. Asst. Professor
20 Miss. S GOUSIYA M.Tech. Asst. Professor
21 Mr. P ANJANEYA PRASAD M.Tech. Asst. Professor
22 Mr. K. L .V.SIVA KUMAR M.Tech. Asst. Professor
23 Mr.S.V KISHORE BABU M.Tech. Asst. Professor
24 Mr.K MOHAN REDDY M.Tech. Asst. Professor

Lab Facility

List of Laboratories

  • Electrical Machines Lab
  • Control Systems Lab
  • Electrical Measurements Lab
  • Electrical Circuits Lab
  • Power Electronics Lab
  • Simulation Lab

Infrastructure Facilities

Electrical Machines Lab
The machinery in the lab includes, Control Panel Board and Rectifier.

DC Machines
Shunt motor 3
Compound motor 1
Motor – Generator sets 6
AC Machines
Alternators 2
Synchronous Motors 1
3 Phase induction Motor 1
1 Phase induction Motor 1
Transformers (1 phase) 7
Auto transformers (1 phase) 4
Auto transformers (3phase) 2
Apparatus includes Rheostats (15 no), Measuring Instruments
(Voltmeter + ammeter + wattmeter)
70
Resistive Loads (1 Phase) 3
Resistive Loads (3 Phase) 3

Control Systems Lab
The control systems lab includes,
Synchro Characteristics
Time Response of First Order System and Second Order System
PID Response of Second Order System
Lead –Lag Networks
Transfer function of DC Generator
Effect of Feedback on DC servomotor
Torque Speed Characteristics of AC Servomotor
Temperature Controller using PID
Magnetic Amplifier
CRO-3 no Function Generators -2

Power Electronics Lab
The Power Electronics Lab includes,
Study of characteristics of SCR, MOSFET, IGBT
Gate firing circuits for SCR s
Single Phase AC Voltage Controller with R and RL loads
Forced Commutation circuits (Class A, Class B, Class C, Class D & Class E)
Single Phase fully controlled bridge converter with R and RL Load
DC Jones Chopper with R and RL Loads
Single Phase series inverter with R and RL Loads
Single Phase Cyclo Converter with R and RL Loads
Single Phase AC Voltage Controller using PSPICE Simulation
Buck Chopper using PSPICE Simulation
CRO-6 no Tapping Transformers – 6 nos

Electrical Machines Lab – II
OC and SC tests on Single Phase transformer
Sumpners test on a pair of Single Phase transformers
Scott connection of transformers
Regulation of a three Phase Alternator by Synchronous Impedance and mmf method
V and inverted V curves of a three phase synchronous motor
Equivalent circuit of a Single Phase Induction motor
Determination of Xd and Xq of a salient pole synchronous machine
Parallel operation of Single Phasr transformers
Separation of core losses of a Single phase transformer
Brake test on Three Phase Induction motor

Electrical Measurements Lab
The Electrical Measurements Lab includes,
Calibration and Testing of single phase energy Meter
Crompton D.C. Potentiometer – Calibration of PMMC ammeter and PMMC voltmeter
Kelvin’s double Bridge – Measurement of resistance – Determination of Tolerance.
Schering Bridge & Anderson Bridge.
Measurements of 3 phase reactive power with single-phase wattmeter.
Measurement of parameters of a choke coil using 3 voltmeter and 3 ammeter methods.
Measurements of 3 phase power with Two watt meter method (Balanced & Un balanced).
LVDT and capacitance pickup – characteristics and Calibration
Resistance strain gauge – strain measurements and Calibration

Electrical Circuits Lab
The Electrical Circuits Lab includes,
Bread Board – 22
Multimeters – 22
Decade Resistance Boxes – 5
Decade Capacitance Boxes – 1
Decade Inductance Boxes – 1
Function Generators – 6 CRO – 4 no Various Resistors Transformer – (Coupled Circuits) – 1
The Experiments Executed in this Lab are, Verification of Theorems – Theremins, Norton, Maximum Power Transfer, Reciprocity, Superposition, Millmans Series and Parallel Resonance
Locus Diagrams
Determination Of Coupling Coefficient

Computer Simulation Lab
The computer simulation Lab Includes,
36 systems with Dual core Processor, 2GB RAM, LED Monitors
Installed with MATLAB, PSPICE, AUTOCAD, MYPOWER
To simulate various models in Control Systems, Power Electronics, Electrical Circuits