Laboratories

The laboratories in department of Electronics and Communication Engineering are intended to give practical experience to the students. Laboratories are useful for students to implement the theory in practical aspects and helps student to apply their knowledge of theory for various courses of their course outcomes.

ECE is equipped with highly developed hardware and Air Conditioned software labs, that have superior quality and sophisticated equipment and trainer kits that allows students to design, implement and think beyond horizon.

ECE finds its application both in hardware and software these days. Most of the experiments are conducted using both hardware and software tools. All the laboratories are equipped with variety of software tools which are necessity of today’s industrial requirement.

The department has its own computer laboratory, possessing computers of Intel dual core processors, connected over campus LAN with high speed Internet connection.>

Detail of various laboratories and their facilities are as follow:

  • Electronic Devices and Circuits Laboratory
  • Integrated Circuits Applications Laboratory
  • Antennas and Microwave Engineering Laboratory
  • Microprocessors and Microcontrollers Laboratory

Software Laboratories:

  • Digital Signal Processing/ Embedded Systems /VLSI Design Laboratory

Electronics Devices and Circuits Laboratory

This lab mainly focuses on semiconductor device physics. The students get familiarized with the analysis and design of circuits by using semiconductor devices like diodes, transistors, FETs, SCRs, and UJTs.

Facilities: (0-30)V Dual DC Regulated Power Supply(11No’s), (0-30) MHz Cathode Ray Oscilloscope(11 No’s), (0-1)MHz Function Generator(11 No’s), Digital Voltmeter(10 No’s), Digital milli-Ammeters(10No’s), Digital micro-Ammeters(10No’s), Digital Multimeters(11No’s), Decade Resistance Box(15No’s), Semiconductor Trainer Kits With On Board Transformer (17No’s), Circuit components for implementing Diodes(100 No’s), Transistors(100 No’s), FET (20 No’s), SCR(20 No’s) and UJT(20 No’s)based circuits,Lcr meter(01No’s),Analog voltmeter(03 No’s),Filp flop kit(01 N0).

Integrated Circuits Applications Laboratory:

This laboratory provides all hardware required to design and analysis of integrated circuits with their applications. This lab aims at teaching the students about Linear Integrated Circuit design using 555 Timer, phase-locked loop and implementing those circuits in real time applications.

Facilities: (0-30)V Dual DC Regulated Power Supply (24No’s), (0-1)MHz Function Generator (15No’s), (0-25)MHz Cathode Ray Oscilloscope (10No’s), Digital Multimeters (11No’s), , Digital Integrated Circuit Tester (2No’s), Semiconductor Trainer Kits With On Board Transformer (16No’s), Analog system lab trainer kit(05 No’s),555 Timer based Monostable and Astable Multivibrator Kits (1No’s), Schmitt Trigger Kits (1No’s), Phase-Locked Loop Kits (2No’s), IC723Voltage Regulator (1No’s), Wave Form Generator (1No’s), Active Filters (1No’s), Integrator and Differentiator (1No’s), IC Components (50No’s) Like 741,555,565,723,7912,7809,7805.

Antennas and Microwave Engineering Laboratory

This laboratory provides all hardware and software required to design and simulation of antennas and high frequency applications. The laboratory is designed to get the exposure to various microwave components, microwave benches in this lab. This laboratory helps the students understand the basics of Microwave engineering and gives a detailed description of the working principle of microwave components.

This laboratory also provides a platform to the students to understand the basics of analog and digital communication systems, modulation techniques, data transmission, multiplexing.

Facilities: Klystron Based Microwave Bench Setup(4 No’s), Gun-diode Based Microwave Bench Setup(2 No’s), Voltage Standing Wave Ratio Meter(6 No’s), Slotted Line(6 No’s), Magic Tee(2 No’s), Circulator(2 No’s), Directional Coupler(2No’s), (0-25)MHz Cathode Ray Oscilloscope (5No’s)Variable Attenuator(6 No’s), Matched Terminator(6 No’s), Isolator(6 No’s), Frequency Meter(6 No’s), Klystron Power Supply(4No’s), Klystron Tube(4No’s), Detector Mount(4 No’s), Wave Guide Stands(24 No’s), Movable Shot(4 No’s),Amplitude Modulation & Demodulation kits(1No’s), Frequency Modulation & Demodulation kits(1No’s), Balanced modulator (DSB_SC)(1N0),Preemphasis and deampasis(1N0),Mixer characteristics(1 N0),Single Side Band & Supressed Carrier kits(1No’s), Synchronous detector(1 N0),Pulse Code Modulation kits (1No’s), Phase Shift Keying kits (1No’s), Frequency Shift Keying kits (1No’s), D-Phase Shift Keying kits (1 No’s), D-Pulse Code Modulation kits (1 No’s), Delta Modulation kits (1 No’s), Amplitude Shift Keying kits (1 No’s), Q-Phase Shift Keying kits (1 No), Pulse Amplitude Modulation kits (1 No’s),Sampling theorem kits(1Nos),Time division multiplexing and DE multiplexing (1Nos), Radio Frequency Signal Generator(1 No),OFC LED characteristics(01 N0),Laser diode characteristics(01No),Digital OFC link(01 No),Analog OFC link(01 N0),Measurement of numerical aparture(1 No),Diode detector characteristics(1 No),Frequency synthesizer(1 N0),Digital phase detector(1 N0),squelch circuit(1 N0),Radio reciver kit(1 No),1GHz spectrum analyzer(1 N0),Yagiuda antenna(1 No),PWM kit(1 N0),PPM kit(1 No)

Microprocessors and Microcontrollers Laboratory​

This laboratory provides all hardware and software required to learn the assembly language programming systematically for the different applications of microprocessor and microcontrollers by using hardware and software environment. The microprocessor lab helps the students to gain a better understanding of 8086 microprocessors and 8051 microcontrollers. Students are able to execute basic assembly language programs as well as interface ADC, DAC and stepper motor through various interface cards available in the lab.

Facilities: Intel 8086 Microprocessor kits with keyboards (12No’s), Intel 8051 Trainer Kits with Keyboards (4No’s), Serial Interface Cable (10No’s), and interfacing modules for 8086 Microprocessor like Stepper Motor (2No’s), 8-Channel 8-Bit Analog To Digital Converter (2No’s), Dual Digital To Analog Converter (1No’s), Programmable Peripheral Interface-8255(1No’s), Universal Synchronous/Asynchronous Receiver/Transmitter-8251(02No’s), Traffic Light Controller (01No’s), Elevator (01No’s) and Direct memory access Controller (1No’s), Interfacing Modules for 8051 Microcontroller like LED Display(01No’s), and Matrix Keyboard (01No’s). desktop Intel Dual core processor/ 2GB DDR4-350GB SATA HDD / keyboard and mouse / NO ODD / 22” Monitor(24 Numbers), MASM open source assembler.

Digital Signal Processing Laboratory:

This laboratory provides all hardware and software required is used to design audio signal, speech processing, voice recognition, and analysis of analog and digital signals by using MATLAB software. The Digital Signal Processing Lab is based on MATLAB tools which are used to evaluate the effectiveness of Fast Fourier Transform algorithms in Discrete Fourier Transform implementation. We can also do the analysis of digital filter design of Finite Impulse Response and Infinite Impulse Response filters.

Facilities: Desktop Intel Dual core processor / 4GB DDR4-500GB SATA HDD / keyboard and mouse / NO ODD / 22” Monitor(36Numbers), MATLAB R2015a software with image processing tool box, 10 number of Embedded Target Board TMS 320C6713 DSP with code composer studio,MSP 430 G2553 launch pad(05 N0’s),MSP 430 F5529 launch pad(05 N0’s),CC3100 booster pack(05 No’s), CC3100 booster pack wifi link(1 N0),Tiva launch pad(10 N0’s),Sensor hub booster pack(03 N0’s), CC3100 pack wifi link(3 N0’s),FPGA Trainer kit(05 N0’s),CPLD Trainer kit(07 N0’s).